We are striving to support every magazine on the market, but sometimes we miss some. Please contact us below and request a magazine you want supported.

If you have not received your order within the estimated shipping time, please contact us via our social media, email, or the Contact Us form on our website.

O-rings generally last about 1-2 years. If you notice your gun not preforming to it's best, try to lubercate the seals first. If that does not work, replacing them is the best option.

All of the O-rings in your airsoft magazine are made from the same nitrile rubber material, when one O-ring goes bad it is a strong indicator that, even if you don't know it yet, the other O-rings are probably bad too.

We have youtube tutorials for all O-ring kits we currently carry, and are constatly adding more. You should be able to find them on our youtube channel or the product page.

"O-ring's" are rings of rubber that are used to create air-tight seals. In airsoft guns, they are what allows your green gas magazine to hold gas. Over time the rubber in the O-rings wear out and they lose the ablility to hold a seal. Our O-ring replacement ktis contain 8-12 High Quality O-rings that are direct replacements for the one that came standard in your arisoft gun so you can get back on the field as soon as possible!'

The most common way to know if your magazine can't hold a seal is if you're constantly running out of shots on the field after you have fully filled your magazine. Other techniques are, spraying soapy water over your filled magazine. If you see any bubbles you know there is a leak. You can also use oil or a tub of water in place of soapy water.

Most O-ring are similar between models, but it is important to select your specific model of magaizne from our store to ensure a perfect fit. If you did select your model and the O-ring kit does not fit, please contact our store.

Between 8-12. It depends on the model of the magazine.

We use a high quality nitrile rubber, the same material used by the OEM manufacturers. We have our own custom manufacturing processes to ensure each O-ring is held to a high tolerance, and will not leak.

The O-ring kits are very easy to install yourself. If you do not feel comfortable opening up your magazine yourself, you should take it to the closest airsoft / paintball store.

It depends on the magazine, but most often you will need a Valve tool, a Phillips head screwdriver or a hammer and punch, and the replacement O-rings. Check each product page for specific instructions.

It takes about 15 minutes to replace the O-rings on your magazine, and the seal should last between 1-2 years.

Whenever you're feeling your magazine might be leaking, the first solution should be to pull apart the magazine and lubricate the O-rings. You can use any silicone oil to do so. As long as the seals are properly lubricate, they should last a long time.

We offer a limited warrenty that is decided on a case by case basis. If you are having issues with our O-ring kits please contact us via our website or email: support@flugbonearmory.com